How do you use a Geek Bar Pulse?
Unbox your Geek Bar Pulse and remove the plug from the mouthpiece. Tear the strip at the top of the box and remove the pouch your Geek Bar Pulse is located in. Open the pouch, then remove the silicone plug from the mouthpiece. Be careful when opening the pouch. You don’t want to drop your new Geek Bar Pulse! Your Geek Bar Pulse should come with a USB-C charger, the device itself, and a card with a list of other flavors. Some packages include a user manual. The flavor card lists the coolness and sweetness levels of each flavor.
Move the bottom tab to the middle or upper position. This will turn your Geek Bar Pulse on. When the tab is in the bottom lower position, your device is off. When it is in the middle position, your device is in standard mode. When it is in the upper position, your device is in Pulse Mode. Pulse Mode offers stronger puffs than standard mode, but it also offers less puffs, so keep that in mind when choosing your preferred setting.
Lightly puff on your device to check that it works. Lightly puff to emit flavor and vapor so you know that your device works. If you’re a veteran vaper, begin to use your device like usual. If you’re new to vaping, gently puff to avoid spitting up e-liquid.
What are the different Geek Bar Pulse settings?
Standard mode uses a single coil and offers 15,000 puffs. This mode is similar to other disposables. Since it alternates between two coils (the heating elements), your puffs will be lightly flavored and hit soft. With the standard mode, you receive a mild experience that lasts longer than other disposables. You get more hits with this mode than with other disposable vapes, which usually offer around 600 puffs. Activate this setting by pushing the bottom tab into the middle position.
Pulse Mode uses both coils for 7,500 stronger, more flavorful puffs. This configuration is the first of its kind. The Pulse Mode activates both coils for stronger, more flavorful hits. Since the puffs are stronger, you only get 7,500 instead of 15,000. Activate this setting by pushing the bottom tab into the upper position. If there is a rocket ship on the screen of your device, that means it is in Pulse Mode.
Why does the Geek Bar Pulse stand out?
The Geek Bar Pulse introduced dual-coil configuration and a smart screen. The dual-coil configuration helps it last longer than other disposables, as it switches coils every time you take a puff in standard mode. It also solves the issue of juice and battery display. You can’t check your battery and e-liquid levels on older disposables, but the Geek Bar Pulse has a smart screen that displays both. The dual-coil configuration has been implemented into other disposable vapes, but the Geek Bar Pulse was the first to introduce this technology. The 650mAh battery, 16mL liquid capacity, and USB-C charging port make the Geek Bar Pulse last longer than other disposable vapes.
What does the screen mean?
The screen shows the battery, mode and e-liquid level when you take a puff. Check the battery by looking for the lightning bolt icon at the top of your screen. The five segments indicate your battery level. An empty open circle in the middle of your screen means your device is in standard mode. A rocket ship in the circle means your device is in Pulse Mode. The e-liquid level is displayed at the bottom of your screen with five segments and a droplet icon.
Taking Care of Your Geek Bar Pulse
Regularly charge your Geek Bar Pulse and store it in a cool, dry place. To ensure that your Geek Bar Pulse is performing well, charge it whenever the battery gets low. When you aren’t using it, turn it off and keep it in a cool, dry place away from high temperatures and direct sunlight to preserve battery and maintain e-liquid quality. Be careful not to drop your Geek Bar Pulse, as it can cause internal damage or an e-liquid leak.
Troubleshooting Issues with Your Geek Bar Pulse
If your Geek Bar Pulse is blinking red, the internal puff sensor may be stuck. Red blinking means your device is in safety mode. This is usually the result of dropping your Geek Bar Pulse on a hard surface. Blow firmly into the mouthpiece to reactivate the internal puff sensor and clear the airflow. If that doesn’t work, you may need to replace your device.
If the LED screen isn’t working, make sure your device is charged. If your device is charged and the screen isn’t working, check to see if the device still hits. If so, you can still use it. If not, it’s time for a replacement.
If your Geek Bar Pulse isn’t charging, check the port for dust or debris. If you plug the device in and the screen doesn’t respond, it isn’t charging. Grab a flashlight and check for any dust or debris. If you spot any, blow air into the port to clear out loose debris. For tougher spots, insert a shaved toothpick or another fine, non-metal tool into the port and use it to dislodge any foreign objects. Be gentle when using the toothpick. You don’t want to damage any internal components!
Comments
0 comment