- Use a soft and dry microfiber cloth to clean the outside of the case. For stubborn dirt, use a small amount of isopropyl alcohol.
- A toothbrush can be used to clean the Lightning port, and cotton swabs can give you more accuracy.
- Never insert anything into the charging port of the case; this can damage the metal contacts needed for charging.
Cleaning the Inside of the Case
Get into the grooves on the top of the case. Keeping these grooves clean will keep your case looking new. Dampen your swab with a little isopropyl alcohol, as necessary. Don’t use enough to soak the cotton, as you do not want drips falling into the electronics of the case. You can gently work wax and dust from these difficult areas with a swab that is only lightly dampened.
Use a toothpick to work on more stubborn grime. This is where bacteria can really get a foothold. A plastic or wooden toothpick should really help you to clean out the cracks and fissures in the case, especially around the lid. Patiently work the waxy buildup free gradually without applying too much force. Here are a few other useful tools that will help you keep your AirPods case looking and charging like new: Tape or 'tack. Use either one to pull dirt, lint, and wax buildup free; if you’re using tape, use a good-quality product that will not leave behind adhesive. Press the piece of tape or lump of tack firmly into grooves to pull wax and general buildup from the cracks on the lid and top of the case. A soft eraser. Use it to rub stubborn stains and dirt away. A soft toothbrush. Only use soft or extra-soft, and put it to work gently scrubbing dirt, dust, and lint from crevices and the Lightning connector.
Use a dry, soft-bristled brush to clean the Lightning port. Brush the Lightning port with the brush with gentle movements. Avoid putting too much pressure; this could lodge dirt and wax further into the port. Avoid putting anything in the charging ports; this can damage the metal contacts below.
Cleaning the Outside of the Case
Give the case general cleaning. Start by using a soft and dry microfiber cloth for a general rub-down and preliminary cleaning. Wipe down the exterior of the case, and get rid of any easy-to-remove lint, dirt, and wax. Avoid using any abrasive materials as these can scratch the case. Dampen the cloth with isopropyl alcohol if necessary. For more difficult grime, dampen the cloth using a small amount of isopropyl alcohol. Gently rub at the debris while avoiding the charging port. Allow the case to dry completely before using it.
Use cotton swabs to rub free any dirt outside of the case. A swab gives you more accuracy and lets you muscle through the gunk. If necessary, dampen the swab with isopropyl alcohol to loosen stubborn dirt and wax.
Finishing the Cleaning
Rub down the case again with a microfiber cloth. Your AirPods case should be looking almost new by now. The last step is a quick finishing polish using a dry microfiber cloth. Rub the case down gently and firmly, giving it a last going over to complete the cleaning process.
Clean the AirPods. Wipe down each AirPod carefully. If there's debris in the grilles, gently brush it away with a toothbrush. You can use a tiny amount of isopropyl alcohol on a cotton swab for dried-on wax, but be very careful not to get it near the grilles and speaker elements. Keeping the AirPods clean can help if they constantly fall out of your ear.
Place the AirPods back in their charging case. They’ll be ready for their next usage.
Comments
0 comment