How to Make a Toy Parachute

Making a Simple Parachute

Get a napkin or cut a square out of a plastic bag. If you are going to use a napkin, choose a large, dinner-sized one. A paper towel could also work.

Cover each corner with a piece of tape. Flip the napkin over, and cover the back of each corner as well. This will make the corners nice and strong for the next step.

Punch a hole into each corner with a hole puncher. Make sure that you are only punching through the taped area, otherwise the napkin will rip. If you don't have a hole puncher, cut a small slit into each corner instead.

Cut four pieces of string. Each piece needs to be the same length as your square. For example, if your square was 8 inches (20 centimeters) on each side, then your strings should be 8 inches (20 centimeters) long.

Thread and tie the strings through the holes. Take your first string and poke the end up through a hole. Bring the end down, and tie it to the rest of the string. Do this for the other strings and corners.

Thread the strings through a button. Find a button that has four holes in it. Feed the other end of each string through each hole. Tie the strings together into one big knot under the button. You can also tie the strings to a paperclip, a charm, or a small washer. If you have a small toy, like a Lego or plastic soldier, tie two strings together on each side to make loops.

Toss the parachute. Hold the parachute by the button, then toss it upwards. If you are allowed to, climb up onto a table or chair, and try again! This will give the parachute even more time to float down! If you made loops for a small toy, slip the loops under the toy's arms first.

Making a Parachute for a Toy Soldier

Cut a large square out of a plastic bag. Make the square at least 8 inches (20 centimeters) on each side. This parachute will only work on small toys, about 1 to 2 inches (2.5 to 5 centimeters) tall. Great toys include toy soldiers and Lego men. It won't work on dolls and bears.

Tie a knot into each corner of the square. This will help keep the strings on. Set the square aside when you are done.

Cut two long pieces of string. Each piece of string needs to be twice the length of you square. For example, if your square was 8 inches (20 centimeters) on each side, then the strings should be 16 inches (40 centimeters) long. You can use yarn, fishing line, embroidery floss, or even thread!

Tie the end of each string to each corner of the square. Take your first string, and tie each end to a corner on the top of the square. Take your second string, and tie each end to the corners on the bottom. Make sure that you are tying the strings behind the knots so that they don't slide off.

Slip a small toy through the loops. Find a small, plastic figure, like a toy soldier or Lego man. Slip the left loop under the left arm, and the right loop under the right arm. If the strings won't stay on, stick a piece of tape over them. The toy should be 1 to 2 inches (2.5 to 5 centimeters) tall. If it's too big or heavy, the parachute won't work.

Toss the parachute. Hold the parachute by the toy, toss it upwards, and watch it float down! If you are allowed to, get onto a chair or staircase, and try again. This will give the parachute more time to fall down.

Making a Large Parachute

Cut a 24-inch (61-centimeter) square out of a cheap, plastic tablecloth. Make sure it is the thin kind; the kind that have the felt coating on the back will be too thick for this project. If you can't find any cheap, plastic tablecloths, use a large trash bag instead. This parachute will work on action figures that are 3 to 4 inches (7.6 to 10 centimeters) tall, like Star Wars action figures.

Cut a 5-inch (13-centimeter) square out of each corner. Fold the square in half to make a rectangle, then fold it in half again to make a square. Draw a 5-inch (13-centimeter) square on the corner where all four corners are loose (not joined). Cut the square out, going through all four layers, then unfold the square. You will have something that looks like a plus sign.

Tape together the cut corners along the bottom point. Go to the first corner you cut the 5-inch (13-centimeter) square from. Push the edges together to close the square. Place a 2-inch (5-centimeter) piece of tape halfway over the bottom edge. Leave the bottom half of the tape hanging over the edge of the tablecloth. Do this for the remaining three corners.

Flip the tablecloth over and fold the pieces of tape onto the back. Flip the tablecloth cove. You should still see the pieces of tape sticking out from underneath it. Fold each piece of tape over the edge of the table cloth. Now the corners are taped on both sides. You will have something that looks like a bag or basket with a slit in each corner. Do not tape these slits up!

Cut two long pieces of string, and make a mark at each end. Find some thin cording, such as crochet string, thin yarn, or kite string. Cut two 30-inch (76-centimeter) pieces. Use a marker to make a dot on each string, 1 inch (2.5 centimeters) away from each end. You will need two dots on each string, one fo each end. These will be your guides for the next step.

Tape the end of your first string to one of the taped corners. Take your first string, and place the end over one of the corners you taped up. Align the mark with the edge of the tablecloth, then place a strip of tape over it. You will have about ½ inch (1 centimeter) of string peeking out over the top of the tape. Keep the tape horizontal; don't let it hang over the edge of the parachute.

Tape the end of the string down. Fold the loose end of the string over the tape, towards the edge of the tablecloth. Place another piece of tape over it to secure it.

Tape the other end of the string to the next corner. Use the same technique as before. When you are done, tape the other string in the same way. When you are done, you'll have two loops hanging from your parachute.

Tie a knot into the middle of each loop. Hook your finger through the first loop and tug it away from the parachute to find the middle. Tie a knot in the loop right above your finger. The loop should have equal amounts of string on both sides of the knot. Repeat this step for the other loop. Leave some space between the knot and the middle of the string. You want to be able to feed elastic through it.

Slip the mini loops over the arms of an action figure. If the loops are too small, you can link mini rubber bands together to make a harness for the figure. You can also lay a strip of tape across the figure and the string to hold everything together.