How to Maintain an Air Conditioner

How often should you have maintenance on your air conditioner?

Get your central AC unit professionally serviced once a year. There are some things you can do to maintain an air conditioner yourself, but you should still hire an HVAC contractor to perform more in-depth annual maintenance. Ask friends or family to refer a good contractor to you or do some research online to choose a reputable company. An HVAC contractor can do things that only trained professionals can do like inspect the electrical connections, lubricate moving parts, check the refrigerant, and test the controls of the system to make sure everything is operating smoothly.

How often should AC filters be changed?

Inspect and clean or change your AC unit’s filter once a month. Dirty AC filters can increase your energy usage and even damage your system if they aren’t cleaned or changed regularly. Clean or replace the filter in your central AC unit monthly during times when you’re using the air conditioning regularly to avoid these problems. You might have to maintain the filter more often if you live with furry pets or if you use your AC in really dusty conditions. Note that this applies to both central AC units and window-mounted air conditioners.

How do you change an AC filter?

Remove the dirty air filter from the air conditioner. Locate the grill covering the AC filter and take it off by unscrewing it, if it’s held in place by screws, or by prying it off if you don’t see any screws. Simply pull out the filter by hand to remove it. In central AC units, the filters are usually located somewhere along the length of the return duct behind a grill in the wall or ceiling. In window-mounted AC units, the filters are behind the grill that faces into the room.

Wash the filter if it is reusable. Soak the filter in warm, soapy water to loosen dust and debris. Rinse off all the grime and let the filter air dry completely before you put it back in the air conditioner. If you have a ductless split AC unit, you can just wipe off the filter behind the panel with a damp rag.

Replace the filter if it is single-use. Purchase a replacement filter and throw out the dirty one. Just slide the new filter into the air conditioner the same way you removed the old one. Replacement filters only cost about $10 USD or so. There are usually arrows on the filter showing you which way to orient it when you put it in your air conditioner.

How do you clean air conditioner coils?

Inspect the coils for dirt and debris. Remove the access panel on the condenser unit to access the coils, which are the copper tubes that you see inside. Look for things like cobwebs, leaves, dirt, and other debris stuck to the coils. On central AC units, the access panel for the coils is on one side of the outdoor condenser unit. For window-mounted AC units, the coils are located behind a panel on the back of the unit that faces outside. You only have to do this once a year to keep your AC unit’s coils clean. A good time to do so would be at the beginning of the summer if you live in a seasonal zone. AC coils are the parts of the system where the refrigerant absorbs heat.

Remove large debris by hand and dust off the coils with a soft-bristled brush. Pull off things like leaves and chunks of dirt and discard them. Lightly dust off the coils with the brush, going in the same direction as the fins on the coils, to remove loose debris and things like cobwebs. Replace the access panel when you’re done cleaning and you’re all set! You can buy a special brush called a coil brush to do this, or just use any kind of whisk brush with soft nylon bristles. They’re pretty much the same thing. Note that this applies to any type of air conditioner.

Clear the area around the condenser unit to help keep the coils clean. Trim any nearby foliage back to at least 2 ft (0.61 m) away to keep leaves and foliage out of the coils and allow for good airflow. Remove any other loose yard debris or dirt from the area around the condenser that could get sucked into the coils. If your condenser unit is located in your yard, avoid passing a lawnmower right by the unit because it could shoot grass and other debris into it. You can use a pair of garden shears to keep grass right by the unit trimmed. This applies to central AC system condenser units, since window-mounted air conditioners aren’t on the ground. Condenser units are the outdoor part of the HVAC system that release or collect heat.

What other maintenance should I do to my AC unit?

Straighten bent coil fins with a fin comb. When you clean your AC unit’s coils, look at the aluminum fins to see if they are bent. The fins are thin metal strips that run parallel to one another right next to the copper coils. If any of the fins look bent, brush a fin comb along their length to easily bend the fins back into their proper positions. You can get a fin comb from AC wholesalers or online. If the coil fins are bent, they can block airflow through the coils and hurt performance. This applies to both central and window-mounted AC units.

Pass a stiff wire brush through condensate drain lines occasionally. Locate the T-shaped condensate line coming off of the condenser unit. Push a skinny, stiff-bristled wire brush down into the top of the drain line and move it back and forth to loosen any clogs. Note that this only applies to central AC units. Window-mounted units don’t have condensate drain lines. Condensate drain lines let all the moisture that gathers in the system drain out. They are usually white pipes that run out of the outdoor condenser unit.

Is there anything special I should do for a window AC unit?

Inspect the seal between the AC unit and the window. Do this at the beginning of each cooling season because the seal can get damaged over time. Make sure the seal is making full contact with the AC unit’s housing and fix or replace it if it’s not. One way to seal gaps around a window-mounted AC unit is by sticking adhesive-backed weather stripping around the unit. You can also fill small gaps by pressing rope caulk into them. Rope caulk is a clay-like material, so just mold it to fit into the cracks. If the seal is not good, cool air from the AC unit can escape your home through the crack.

Wash the fans with soapy water. Remove the unit from the window, take it outside, and unscrew the housing. Locate the 2 fans: the blower fan near the evaporator and the bladed fan near the condenser. Scrub the fans with a soft brush and a solution of warm water and a few drops of dish detergent. Rinse off the fans with a hose and put your AC unit back together. This is also a good time to rinse any water out of the condensate pan beneath the coils with fresh water from your hose.

How do I prepare my AC unit for winter?

Store window-mounted AC units until the next cooling season. Take your AC unit out of the window and put it inside somewhere in a dry place. Put a cover over it to keep dust and dirt out. This helps your window-mounted AC unit last much longer than if you let it weather the winter in your window sill.

Cover the outdoor condenser unit for central AC systems. Purchase a condenser unit cover to fit your unit. Place it over the condenser at the end of cooling season to protect it from ice, snow, dirt, and debris through the winter months. Outdoor condenser units are pretty durable and meant to hold up to cold weather, but excessive snow and ice can still damage the coils over time. Avoid hard plastic covers or any type of covers that completely restrict airflow because they can trap excessive moisture inside the unit, leading to internal damage.